Maintenance And Trouble Shooting - Siemens BT 200 Manual

English 04/00
7 Maintenance and Trou ble-
Shooting
7.1 Charging Status of the B attery
The charging status of the battery is indicated
for approximately 2 seconds during startup.
This display then disappears.
The charging status can also be indicated via
the service menu during operation.
If the battery goes dead during operation, the
charging status begins to flash.
Standard values
If you want to reset all values to their status
on delivery, keep both cursor keys pressed
for approx. three seconds after switch-on.
7.2 Changing the Battery
Fig. 11 Changing the battery
Page 24 (S)J31069-D0075-U001-A2-6318
BT 200