3.
Use I/O Parameter window for more convenient setting.
Figure 51 – I/O Parameter window 8 (scaling range)
Process alarm limit setting (addresses 27–42)
1.
Setting range can be specified individually based on the unit of temperature output
(°C /°F) and the type of sensor (Pt100/JPt100).
2.
If the set value is outside the range, setting error will occur with the setting value
saved inside the module.
R200
Resistance Temperature Detector 2MLF-RD4A User's Guide
September 2010
5. Internal Memory Configuration and Functions
Figure 52 – Process alarm limit
Honeywell
5.3. Operation parameters setting area
99