Program code
N140 Z110 G40
N150 G0 X25 Y0
N170 TRAFOOF
N180 M30
2.2.5.2
Machining grooves on a cylinder surface with X-Y-Z-A-C kinematics
The example refers to the 5-axis milling machine with an A- and a C-axis in the following figure.
XM
YM
ZM
AM
CM
SPM Main spindle
Parameter assignment
Machine axis name
● MD10000 $MN_AXCONF_MACHAX_NAME_TAB[ 0 ] = "XM"
● MD10000 $MN_AXCONF_MACHAX_NAME_TAB[ 1 ] = "YM"
● MD10000 $MN_AXCONF_MACHAX_NAME_TAB[ 2 ] = "ZM"
Transformations
Function Manual, 06/2019, A5E47435470B AA
1. axis of the machining plane
2. axis of the machining plane
Infeed axis
Rotary axis
Rotary axis
2.2 TRACYL cylinder surface transformation (option)
Comment
; Travel away from the groove wall and TRC dese-
lection
; Return to the initial position
; Deactivate transformation
; End of program
M1: Kinematics transformation
63