Motorola R-2200 Operator's Manual page 46

6.1.3 PACKAGING INSTRUCTIONS
Any time the unit must be shipped via commercial car-
riers, it must be packaged to prevent damage. The
recommended package for shipping is the original ship-
ping carton the unit was delivered in. These boxes when
properly taped closed, are designed to prevent shipping
damage.
If the original shipping cartons are not available. the
RTL-4115~A Transit Case is highly recommended and is
also designed to safely cushion the unit in shipping.
Lacking the a hove. a douhle-hox of strong. undamaged
cardboard with expanded plastic filler can he fabricated
from available shipping cartons.
NOTE: In the event that equipment is returned to the
Motorola Test Equipment Service Center in a dam-
aged condition due to improper packaging. Motorola
will assume no liability for the damage.
6-2
6.1.4 INSTALLATION INTO EXISTING R-2200
UNITS IN THE FIELD
The RPX-4309A kit is available on a FIELD RETROFIT
basis for any R-2200 already shipped and installation is very
simple. Basically, only a screw driver to remove the top
cover, 2 new EPROM's which are included in the RPX-
4309A and a, wire must be soldered on the bottom mother
board is all that is required. The wire is only necessary to
allow the unit to include non-volatile memory. RTL-4161A
installs in option module slot A9 which is color coded red.
Insert main software (PIN 5IR80323B05 & 5IR80323B06)
into the appropriate sockets located in CPU Board, RTC-
4023A. Observe polarity and location when exchanging
software.