Threading The Web; Turning Off The Rewinder - HP Indigo Series User Manual

Threading the web

1
2
3
4
5
6
7
8
9

Turning off the rewinder

1
2
10 Threading the web
From the exit of the printing engine, ensure that you have enough web.
Thread the web as shown in figure 1-10.
Figure 1-10. Threading the web
1 Nip cassette
2 Start of web
When the web reaches the nip cassette, touch the right Clamp Down button. The nip
cassette opens.
Thread the web through the nip cassette.
Touch the right Clamp Up button. The nip cassette closes.
When the web reaches the core, tape the web to the core.
Use either the spindle ruler or the core stop ring to align the core with the middle of
the rewinder spindle.
Touch Air on Spindle. The core inflates.
Touch Standby On/Off. The web is rewound.
Release all tension in the rewinder (see "Adjusting the substrate tension" on page 8).
Turn the main switch (see figure 1-2).
1
2
EN