Installation On Pedestal; Installation Of Mains Shield For Frequency Converters; Usb Extension Kit; Installation Of 4X Or 5X Loadshare Option - GE AF-650 GP Operating Instructions Manual

Installation

3.3.6 Installation on Pedestal

This section describes the installation of a pedestal unit
available for the frequency converters Unit Sizes 41 and 42.
This is a 200 mm high pedestal that allows these Units to
be floor mounted. The front of the pedestal has openings
for input air to the power components.
The frequency converter gland plate must be installed to
provide adequate cooling air to the control components of
the frequency converter via the door fan and to maintain
the IP21/NEMA 1 or IP54/NEMA 12 degrees of Unit
protections.
Illustration 3.9 Drive on pedestal
There is one pedestal that fits both Unit Sizes 41 and 42.
The pedestal is standard for Unit Size 51.
Ordering information
Unit size 41/42: OPC4XPED
AF-650 GP High Power Operating Instructions
Illustration 3.10 Mounting of drive to pedestal.
3.3.7 Installation of Mains Shield for
Frequency Converters
This section is for the installation of a mains shield for the
drive series with Unit Sizes 41, 42 and 51. It is not possible
to install in the IP00/ Chassis drive types as these have
included as standard a metal cover. These shields satisfy
VBG-4 requirements.
NOTE
For further information, please consult GE.

3.3.8 USB Extension Kit

A USB extension cable can be installed into the door of
unit size 6x frequency converters.
Ordering information
Unit size 1x through 5x: OPCUSB
Unit size 6x: OPCUSB6X
3.3.9 Installation of 4x or 5x Loadshare
Option
The loadshare option can be installed on unit sizes 41, 42,
43, 44, 51 and 52.
Ordering information
Unit size 41/43: OPCLSK41
Unit size 42/44: OPCLSK42
Unit size 51/52: OPCLSK51 for 460 VAC
OPCLSK52 for 575 VAC
The drive can be purchased with the factory installed
brake chopper which includes load share terminals as
factory installed.
3 3
23