Add/Delete Digit For E&M Tie Line - NEC SL1000 Programming Manual

Issue 0.1
Level
IN
Description
Use Program 34-06 : Add/Delete Digit for E&M Tie Line to set digits that the system should add or
delete for Tie Lines.
• Delete Digit
Some Tie Line networks pass the location number and extension number to the remote side. This
program allows the system to ignore such numbers for a call.
If individual extension users do not want to receive an incoming call, they could delete all digits
including the extension number.
• Add Digit
If a Tie Line network requires additional digits to reroute the call to a location, the digits for the lo-
cation can be added to the received digits.
Input Data
Incoming Trunk Group Number
Item No. Item
01 Delete Digit
02 Additional Dial Digits
Conditions
None
Feature Cross Reference
• Tie Lines
Programming Manual
Program 34 : Tie Line Setup
34-06 : Add/Delete Digit for E&M Tie Line
Input Data
0~255 (255 = delete all digits)
Up to four digits (0~9, , #)
*
SL1000
001~025
Default
0
No Setting
2-313
Program
34