Siemens SINUMERIK 840D sl Commissioning Manual page 22

Start tool
4.2 Select the SINUMERIK software update tool
In this case, proceed as follows to select the SINUMERIK Software Update Tool:
1. Move the bar with the cursor keys until the SINUMERIK Software Update Tool is selected.
2. Confirm the HSK7 ("Next") to start the tool.
Figure 4-2
Note
Data backup packages in gray
Note that data backup packages shown in gray can be executed on the currently connected
SINUMERIK, but were created on a different SINUMERIK (different CF card number).
22
Select the SINUMERIK Software Update Tool
SINUMERIK Software Update Tool
Commissioning Manual, 03/2018, A5E42187770B AA