Page 1
Quick Start 1 Installing the Base When you install the base, ensure that the arrow on the base points to the front panel of the HG532s Home Gateway (HG532s for short). 2 Connecting Cables 1. Power adapter 2. Desktop computer 3.
Accessing the Network Through the Embedded PPP Dial-up Software on the HG532s If you select this method for accessing the network, the HG532s starts to set up a dial-up connection automatically after the startup. You can access the network after you power on your computer.
If you select this method for accessing the network, you need to install and configure the dial-up software on your computer. In addition, you need to perform dial-up operations on your computer upon each startup. To configure the HG532s and your computer for the network access, do as follows: Step 1 Set the working mode of the HG532s to Bridge.
4. Click OK to close the dialog box, and then close the Services window. Step 2 Find the wireless network name (SSID) and its password (WLAN Key) printed on the label on the HG532s's rear panel. If they have been changed, please use the new wireless network name and password.
6 Safety information This section contains important information about the operation of your device. It also contains information about how to use the device safely. Read this information carefully before using your device. Electronic Device Do not use your device if using the device is prohibited. Do not use the device if doing so causes danger or interference with other electronic devices.
Keep the device away from sources of heat and fire, such as a heater, microwave oven, stove, water heater, radiator, or candle. Do not place any object, such as a candle or a water container, on the device. If any foreign object or liquid enters the device, immediately stop using it, power it off, and remove all cables connected to it.
If the power cable is damaged (for example, the cord is exposed or broken), or the plug loosens, stop using it at once. Continued use may lead to electric shocks, short circuits, or fire. Do not touch the power cord with wet hands or pull the power cord to disconnect the power adapter.
RoHS compliance, please visit the web site www.huaweidevice.com/certification. EU Regulatory Conformance Statement Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For the declaration of conformity, visit the web site www.huaweidevice.com/certification.
Page 9
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications to this device not expressly approved by Huawei Technologies Co., Ltd. for compliance could void the user's authority to operate the equipment.
No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. and its affiliates ("Huawei"). The product described in this manual may include copyrighted software of Huawei and possible licensors. Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders.