NEC DT830 Series User Manual page 68

STEP 6: Select either
Select an item by one of the following operations.
• Highlight an item by using
key, and then press
• Press 1 or
soft key.
[Screen Saver]
1
Disable
2
Enable

Note:
Default setting is
Note: The enabled item is highlighted.
STEP 7: The display goes back to the Screen Saver
screen. When
2
6, Select Wait Time.
Input Wait Time to launch the screen saver (1-999min)
and then press
[Wait Time]
Input wait time.
1-999(min)
120
BK
Note: Default value is 120 min.
1 2
Disable or Enable.
or the UP/DOWN soft
or the OK soft key.
2 key, and then press or the OK
Back OK
Disable.
1
2
Enable is selected on Step
or the OK soft key.
1
Back OK
• TO ENABLE/DISABLE BACKLIGHT
The following explains how to enable/disable the
backlights of LCD and digit keys.
Note:
Backlight feature is optional. For DT410 Series,
this feature is not supported.
The backlights illuminate (for approximately 10
seconds) when you press any key or lifts the handset.
STEP 1: Display the Menu screen, and select Setting.
1
STEP 2: Select
Select an item by either of the following operations.
• Highlight an item by using
key, and then press
1
• Press
[Setting]
1
User Setting
2
Download
Data Backup/Restore
3
3
STEP 3: Select
Select an item by either of the following operations.
• Highlight an item by using
key, and then press
3
• Press
59
User Setting.
or the UP/DOWN soft
, or the OK soft key.
key.
 Menu OK
Display.
or the UP/DOWN soft
, or the OK soft key.
key.