HP Z27 Disassembly Instructions Manual

HP Z27 Disassembly Instructions Manual

27-inch 4k uhd display

Advertisement

Product End-of-Life Disassembly Instructions
Product Category: Monitor and Display
Marketing Name / Model
[List multiple models if applicable.]
HP Z27 – 27-inch 4K UHD Display
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the
disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU directive
2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
NOTE: Recyclers should sort plastic materials into resin streams for recycling based on the ISO 11469 plastic marking code on the
plastic part. For any questions on plastic marking, please contact
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries, excluding Li-Ion batteries.
Li-Ion batteries. Include all Li-Ion batteries if more than
one is provided with the product (such as a detachable
notebook keyboard battery, RTC coin cell, etc.)
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater than
100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring greater
than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants (not
including PCBs or PCAs already listed as a separate item
EL-MF877-00
Template Revision C
Last revalidation date 04-01-2018
Notes
With a surface greater than 10 sq cm
Function key BD, IF BD, POWER BD, LED Driver
BD
All types including standard alkaline, coin or button style
batteries
Battery(ies) are attached to the product by (check all
that apply with an "x" inside the "[ ]"):
[
[
[
[
NOTE: Add detailed removal procedures including
required tools in the sections 3.1/3.2.
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps Panel
Power BD only (C805)
USB cable,Display cable, Power cord
HPI instructions for this template are available at
HP's Sustainability
Contact.
] screws
] snaps
] adhesive
] other. Explain
EL-MF877-01
Quantity of
items
included in
product
4
0
0
0
1
0
0
1
3
0
0
Page 1

Advertisement

Table of Contents
loading

Summary of Contents for HP Z27

  • Page 1 Marketing Name / Model [List multiple models if applicable.] HP Z27 – 27-inch 4K UHD Display Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HPI products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Quantity of items Item Description Notes included in product above) Components and parts containing toner and ink, Include the cartridges, print heads, tubes, vent including liquids, semi-liquids (gel/paste) and toner chambers, and service stations. Components and waste containing asbestos Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances...
  • Page 3 External Electric Cables Dissecting Process 1.Remove Cable From Display Head.
  • Page 4 Remove Stand Base From Display Head 2. Pull the release button 3.Remove Stand Base From Display Head.
  • Page 5 Remove Rear Cover From Display Head 4.Remove Rear Cover From Display Head.
  • Page 6 Remove Back cover from Display Head Remove 3screws Remove 5 screws 5. Remove Back cover from display head Remove 4screws...
  • Page 7 Remove Bracket Assy from head Remove and cable 6. Remove Bracket Assy from head...
  • Page 8 Remove Mid-cover / bracket from head Remove screws Function key 7.Remove Mid- cover from head...
  • Page 9 Disassemble Bracket ASSY Remove Screws Remove Screws Remove cable Gasket and thermal pad...
  • Page 10 Disassemble Bracket ASSY Remove heat sink screws Remove screws...
  • Page 11 Disassemble Rear cover Remove Function key...
  • Page 12 Disassemble Front Chin Remove Function key...
  • Page 13 Disassemble Stand ASSY Remove 4 screws Remove screw Remove screw And rubber Separate base-top cover Separate base-bottom cover...
  • Page 14 Disassemble Stand ASSY Remove screw Separate VESA cover...
  • Page 15 Disassemble Stand_Pivot ASSY Remove screw...
  • Page 16 Disassemble Stand ASSY Remove screw Separate Lift rear cover Remove screw Remove screw Remove screw and lift front cover...
  • Page 17 Method of LCM disassembly on LM270WR3-SSA1 Bare LCM Step1 : Loosen the Screw (3 Points) Step2 : Remove the C/Shield Step5 : Remove Optical material Step4 : Separate Board Ass’y + G/Panel Step3 : Detach the Black Tape (6points) (Sheet + LGP + Reflector) Step6 : Separate LGP holder from C/Bottom Step7 : Separate C/Board from C/Bottom Step8 : Separate LED Array from C/Bottom...
  • Page 18 Method of LCM disassembly on LM270WR3-SSA1 Final : LED Array & C/Board & C/Bottom & LGP Holder...

Table of Contents