Sony BKDW-515 Installation And Maintenance Manual page 21

ITEM DATA
No. ITEM No.
F20 CONFI LED 0
STATUS 1
. CP ROM
version 1.10
and higher
F21 PROCESS 0
CONT VR 1
LOCAL
ENABLE
. CP ROM
version 1.10
and higher
F22 AUDIO ONLY 0
REC 1
2
. CP ROM
version 1.10
and higher
F23 A/V INPUT 0
SELECT 1
INHIBIT
. CP ROM
version 1.10
and higher
F24 MAXIMUM 0
(PAL) DIGITAL TAPE 1
SPEED 2
. CP ROM
3
version 1.10
and higher
F24 MAXIMUM 0
(NTSC) DIGITAL TAPE 1
SPEED 2
. CP ROM
3
version 1.10
and higher
F25 SERVO/AV REF 0
SEL IN PRE- 1
READ MODE
. CP ROM
version 1.10
and higher
F26 DIGITAL AUDIO 0
MUTE IN 1
SEARCH MODE
. CP ROM
version 1.10
and higher
BKDW-515
Description
DATA
switch The condition to light CONFI LED on the control panel is selected.
status 0: CONFI LED lights on when CONFI switch is set to ON.
1: CONFI LED lights on when playing back with CONFI head. Note that CONFI
LED indicates the switch status only during the CONFI switch is pressed.
off In case that LOCAL DISABLE command is effective via the 9pin REMOTE, or "all
on disable" is selected in Setup 006: LOCAL FUNCTION ENABLE, the availability of
PROCESS CONT VR on the subcontrol panel is selected.
0: Process control is invalid.
1: Process control is active.
off The unit directly goes into digital audio edit mode from playback mode by AUDIO
momentary EDIT PRESET key.
toggle 0: Does not go into Edit mode by AUDIO EDIT PRESET key.
1: Audio editing is available while AUDIO EDIT PRESET key is pressed.
2: Audio editing is available when AUDIO EDIT PRESET key is pressed once.
When pressing once more, it returns to PLAY mode.
off Audio/Video Input Select switch can be invalid during REC mode.
on 0: Audio/Video Input Select switch is active in REC mode.
1: Audio/Video Input Select switch is invalid in REC mode.
If Item-21 is set to ON, Audio/Video Input Select switch is active even if "1" (on) is
selected in this menu.
x50 Maximum speed of digital tape is limited in search mode.
x42 0: 50 times speed in FF, REW, and SHUTTLE mode
x42/x24 1: 42 times speed in FF, REW, and SHUTTLE mode
x24 2: 42 times speed in FF and REW mode, and 24 times speed in SHUTTLE mode
3: 24 times speed in FF, REW, and SHUTTLE mode
x50 Maximum speed of digital tape is limited in search mode.
x35 0: 50 times speed in FF, REW, and SHUTTLE mode
x35/x24 1: 35 times speed in FF, REW, and SHUTTLE mode
x24 2: 35 times speed in FF and REW mode, and 24 times speed in SHUTTLE mode
3: 24 times speed in FF, REW, and SHUTTLE mode
off Servo Reference in PREREAD mode is specified.
on 0: It works according to the setting of Item-309.
1: EXT REF VIDEO is selected.
off The condition for MUTE of Digital Audio when playing back in Search mode is
on selected.
0: It works according to the setting of Item-802.
1: Mute is applicable in the modes except PLAY and EE.
3-1. ITEM-F Series
3-3