Sony 2-678-737-13(1) Operating Instructions Manual page 72

Operating the Menus
Icon/Menu Submenu
DISPLAY
MARKER
SET BURN
(page 42)
ALLSCAN
MODE
DATA CODE
(page 36)
LETTER SIZE
DATE
DISPLAY
TIME
DISPLAY
REMAINING
(page 26)
LCD BRIGHT
LCD COLOR
72
Chapter 5 Adjusting and Setting Through Menus
Setting
Selects whether to output MARKER BURN or not.
OFF : Does not output MARKER BURN.
ON : Outputs MARKER BURN.
Note
There are some limitations to output MARKER BURN. For details, see page 42 .
Reduces the image on LCD panel to check the area surrounding the picture frame where
the monitors can not display.
OFF : Disables the ALLSCAN MODE.
ON : Enables the ALLSCAN MODE.
Notes
• ALLSCAN MODE is for HDV format only. ALLSCAN MODE does not activate when
DVCAM and DV(SP)-formatted tapes are played.
• If formats are mixed on a tape, the part where the format has changed on a tape cause
distortion of images.
• When [ON] is selected and the output level of COMPONENT OUT is set to 480i, 576i,
480p/480i, or 576p/576i, output images from S VIDEO OUT jack and VIDEO OUT jack
down converts to letter box. For details, see page 85 .
• Once the unit turns off, the setting of [ALLSCAN MODE] sets to [OFF] automatically.
• When you set [MARKER BURN] and [ALLSCAN MODE] in [DISPLAY SET] menu to [ON]
at the same time, the marker will not appear in the correct position on LCD monitor. This is
not a malfunction. The marker will be output correctly via each video jack.
Selects whether or not to display the data codes on the analog video output.
OFF : Does not display the data codes.
DATE: Displays the date and time when recorded.
CAMERA DATA: Displays the camera data.
Selects the letter size of the menu at the cursor.
NORMAL : Normal size
2 x : Double height size
Selects the date display in the search screen, the data code display, etc.
Y/M/D : Displays YY/MM/DD (year/month/day).
M/D/Y: Displays MM/DD/YY (month/day/year).
(Default setting for HVR-M25U/M25N.)
D/M/Y: Displays DD/MM/YY (day/month/year).
(Default setting for HVR-M25E/M25P.)
Selects the time display in the search screen, the data code display, etc.
12H : Displays 12-hour time. (Default setting for 60i as the factory setting.)
24H : Displays 24-hour time. (Default setting for 50i as the factory setting.)
AUTO : The remaining tape time is displayed for 8 seconds under the following
conditions.
– If the remaining tape time is determined when you turn on power while
a cassette is loaded in the unit.
– When you press PLAY button.
Always displays under the following conditions.
– Fast forward, rewind
– Fast forward during playback, rewind during playback
ON : Always displays the remaining tape time.
Adjusts LCD monitor brightness. Press J/j buttons and EXEC button to adjust the
brightness. (The mark under the bar is the factory setting value.)
Adjusts the color density of LCD monitor. Press J/j buttons and EXEC button to adjust the
brightness. (The mark under the bar is the factory setting value.)