Sony HD100 Operating Instructions Manual page 36

Setting Up Your Digital Satellite Receiver (SYSTEM)
(continued)
36
4
Highlight and select "RF".
The Remote Signal pop-up closes to show the Remote Control
display.
5
Highlight and select "Return".
The display closes to show the Main Menu, and the Digital
Satellite Receiver is set to receive RF signals from the remote
control.
Setting the Security Code
If you set the Remote Signal setting to "RF" and the Digital Satellite
Receiver is receiving signals from another RF remote control in your
home (or from your neighbor's home), you can eliminate this problem by
changing the security codes for the Digital Satellite Receiver and remote
control, or by selecting IR control.
Both the Digital Satellite Receiver and the remote control must use the
same three digit security code.
1
Highlight and select "RF Security Code" from the Remote
Control display (see page 35).
The confirmation pop-up appears.
2
Select "Yes".
The RF Security Code pop-up appears.