Philips Avalon CTS M2720A Service Manual page 41

Changing the Power Supply/Metal Chassis Assembly
Step 3: Removing the Receiver Board
First remove the MIF board (see Step 1).
1
2 Remove the four screws securing the receiver board to the chassis using a T-10 Torx driver.
3 Gently lift the front right hand corner of the receiver board, at the same time pulling it forward.
Next, lift the rear left hand corner of the board so that the board is clear of the metal screw fixing post.
4
Screw locations
Screw fixing post
4 Disassembly/Reassembly
35