TP48200A-HX09A2, TBC300A-TCA2 Outdoor Power
System
User Manual
Figure 4-30 Removing the temperature sensor cable
Step 3 Cut off the cable tie of the sensor in the equipment compartment and remove it.
Figure 4-31 Position of the temperature sensor
Step 4 Properly place the new temperature sensor in the equipment compartment and bind it securely
with a cable tie.
Step 5 Reconnect the temperature sensor cable to the UIM.
Step 6 Disconnect the ground cable from the ESD wrist strap, and take off the ESD wrist strap and
ESD gloves.
----End
Issue 02 (2019-02-26)
Copyright © Huawei Technologies Co., Ltd.
4 Maintenance
80