2. Verify that the gasket is present and properly seated in the bezel channel located on the sides of the unit.
3. Insert the QuickPanel
+
4. Insert the hook of the mounting bracket into the mounting hole as displayed in the following figure.
5. Tighten the screws on the mounting bracket in a clock-wise direction.
Display Unit
IC755CxS06RDx
IC755CxW07CDx
IC755CxS10CDx
IC755CxS12CDx
IC755CxS15CDx
Mounting and Installation
For public disclosure
into the mounting panel cutout.
Torque Range for Mounting Clamp Screws
Torque Range
0.3 Nm (2.66 in-lb)
0.3 Nm (2.66 in-lb)
0.7 Nm (6 in-lb)
1.0 to 1.2 Nm (8.9 to 10.6 in-lb)
1.0 to 1.2 Nm (8.9 to 10.6 in-lb)
GFK-2847W 67