Dangerous Materials; External Operations - Siemens SRA 4 User Manual

1 - PRELIMINARY INFORMATION
1.2.1.3
1.2.1.4
1-4

Dangerous materials

The radio equipment at the end of its life can be classified as "16 02 14 equipment out
of use different from the equipment listed in 16 02 09 to 16 02 13" according to the
dangerous waste list determined in article 1 para. 4 of Government Recc. 91/689/EEC
on the dangerous waste updated in Recc. 2001/118/EC.
The equipment does not include:
– Cadmium
– Mercury
– Asbestos
– Radioactive materials
– PCB
– Berillium
Ex ternal operations
Some other operations involving danger conditions are the ones executed outside
during the equipment installation and starting up phase.
During the execution of such operations, it is necessary to follow strictly the safety rules
listed here below:
– During installation, while the antenna and/or the external supporting-frame for rod
are lifted, it is strictly forbidden to stay or to pass in the underlying area. Such an
area must be properly restricted or signalled according to the on force rules.
– For the external operations to be executed on the antenna, on the frame and on
the ODU, all the necessary safety rules against accidental fallings of the operators
must be respected, according to the on force rules. For example, it is necessary to
use protection fences and belts.
– During the equipment starting up phase, the operators must not be in front of the
antenna.
If one of the above mentioned safety rules is not respected, some injuries to the
personnel can be caused.
SRA 4 - 6/7/8/10/11/13 GHz (WB ODU) - UMN
911-381/02C0000 - Issue 3, July 2004