Table of Contents
Advertisement
12BIT 10MSPS ADC
PHANTOM CELL INFORMATION
- Pins of the core can be assigned externally (Package pins) or internally (internal ports) depending
on design methods.
The term "External" implies that the pins should be assigned externally like power pins.
The term "External/internal" implies that the applications of these pins depend on the user.
bl8531h_adc
12bit 10MSPS ADC
SEC ASIC
Pin Name
VDDA
VSSA
VBB
VDDD
B_INP
VSSD
B_INN
R_INP
External/Internal
G_INP
R_INN
External/Internal
G_INN
G_INP
External/Internal
G_INN
External/Internal
R_INP
B_INP
External/Internal
R_INN
B_INN
External/Internal
CKIN
External/Internal - Separate from all other analog signals
BUEB
External/Internal - Maintain the larger width and the
REFTOP
GREENB
REDB
REFBOT
External/Internal
STBY
External/Internal
REDB
External/Internal
GREENB
External/Internal
BLUEB
External/Internal
DO[11]
External/Internal
DO[10]
External/Internal
DO[9]
External/Internal
DO[8]
External/Internal
DO[7]
External/Internal
DO[6]
External/Internal
DO[5]
External/Internal
DO[4]
External/Internal
DO[3]
External/Internal
DO[2]
External/Internal
DO[1]
External/Internal
DO[0]
External/Internal
9 / 11
Pin Usage
Pin Layout Guide
- Maintain the large width of lines as
External
far as the pads.
External
- place the port positions to minimize
the length of power lines.
External
- Do not merge the analog powers with
anoter power from other blocks.
External
- Use good power and ground source
External
on board.
- Do not overlap with digtal lines.
- Maintain the shotest path to pads.
shorter length as far as the pads.
- Separate from all other digital lines.
- Separated from the analog clean
signals if possible.
- Do not exceed the length by 1,000um.
BL8531H_ADC
MIXED
Advertisement
Table of Contents
