Changing The Display; Using The Sleep Timer - Sony 3-289-450-44(1) Operating Instructions Manual

Changing the display

You can check the sound field, etc., by
changing the information on the display.
Be sure to use the buttons on the receiver for
this operation.
Press DISPLAY repeatedly.
Each time you press the button, the display
changes cyclically as follows:
All inputs except the FM and AM
band
Index name of the input
t Sound field currently applied t Volume
level t Stream info
FM and AM band
Program Service name
a)
t Frequency t Program Type
name
b)
indication t Radio Text indication
Current Time indication (in 24-hour system
b)
mode) t Sound field currently applied
a)
Index name appears only when you have assigned
one to the input or preset station (page 67, 80).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input name.
b)
RDS
During reception only (Models of area code
CEL, CEK, ECE only) (page 68).
Note
Character or marks may not be displayed for some
languages.
a)
t Selected input
b)
or preset station
b)
t

Using the Sleep Timer

You can set the receiver to turn off
automatically at a specified time.
Press SLEEP repeatedly while the
power is on.
"SLEEP" lights up in the display.
Each time you press the button, the display
changes cyclically as follows:
0:30:00 t 1:00:00 t 1:30:00 t
OFF t
2:00:00
Tip
To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
on the display. If you press SLEEP again, the sleep
timer will be canceled.
81 GB