Page 1
Fridge-freezer Réfrigérateur / congélateur combiné Refrigerador/congelador B36CT... Installation instructions and instructions for use ....2 Notice de montage et d’utilisation ........34 Instrucciones de uso y montaje ......... 68...
en-us enTable of contents e n I n s t a l l a t i o n i n s t r u c t i o n s a n d i n s t r u c t i o n s f o r u s e Important safety instructions .
Important safety instructions en-us Important safety instructions READ INSTRUCTIONS - DO NOT DISCARD! Important safety instructionsI m p o r t a n t s a f e t y i n s t r u c t i o n s R EAD INSTRUCTIONS - DO NOT DISCARD! Definitions Risk of explosion Never use electric devices inside the...
en-us Important safety instructions Important safety instructions READ INSTRUCTIONS - DO NOT DISCARD! Only use original parts supplied by the Risk of suffocation ■ manufacturer. Keep children away from the packaging These parts come with a warranty from ■ and its parts. the manufacturer that they satisfy the To avoid having children climb into the safety requirements.
Intended use en-us 8Intended use 5 Installation and connection U se this appliance I n t e n d e d u s e only for cooling and freezing food, ice making ■ C ontents of package and water dispensing. I n s t a l l a t i o n a n d c o n n e c t i o n only in the home and in the home environment.
en-us Installation and connection Installing the appliance Door opening angle Installation location ⁷/ ⅞ ″ Pro 57 ″ ¹/ ″ (1459 mm) (1470 mm) The weight of the appliance may be up to 419 lb (103 mm) (190 kg) depending on the model. The base must ⁷/ Pro 4 ″...
Page 7
Installation and connection en-us Ventilation Use a 2.5 mm Allen wrench to tighten the pre- assembled screws in the handle clockwise from Never cover or block ventilation openings. the bottom. Aligning the appliance CAUTION To avoid damage to the floor, always move the ■...
Page 8
en-us Installation and connection Align refrigerator compartment doors Loosen the safety screw. Align the vertical gap of the doors: CAUTION Do not remove the safety screw. Note: Remove the contents from the doors, if present. Remove the screw T20 and cover cap on the door hinge.
Page 9
Installation and connection en-us Align the horizontal gap between the doors: Push up the adjustable part and turn by 60° until the desired position is reached. – The door height can be set at 2 levels, adjusted by 1/16" (1.5 mm) in each case. The higher level is followed by the lower.
Page 10
en-us Installation and connection Aligning the drawers Loosen the upper screw on both sides. Note: Do not remove the screws. You can align the drawer vertically: Open the drawer as far as it will go and remove the bin. Remove the center screws on both sides. Lift the drawer and remove the lower screws on If you want to reset the drawer to the factory Note:...
Page 11
Installation and connection en-us You can adjust the angle of the drawer: Loosen the upper and lower screw on both sides. Note: Do not remove the screws. Open the drawer as far as it will go and remove the bin. Remove the center screws on both sides.
en-us Installation and connection Saving energy If you follow the instructions below, your appliance will use less power. Note: The arrangement of the fittings does not affect the energy consumption of the appliance. Installing the appliance Keep the appliance out of direct sunlight. The appliance needs to cool less frequently at low ambient tempera- tures and therefore consumes less power.
Installation and connection en-us Before using for the first time Electrical connection Remove information material, adhesive tape and CAUTION protective foil. Remove the power cord from the appliance. Do not connect the appliance to electronic energy saver plugs. Clean the appliance. Install the equipment.
Getting to know your appliance en-us Operating controls 0 8 @ ` h )" )* )2 ): Refrigerator compartment Û super button ÿ power button Switches super cooling on or off. Switches the appliance on or off. Refrigerator compartment temperature alarm off button display Switches off the alarm.
en-us Getting to know your appliance Controls for cool-fresh compartment 29°F button 40°F button Sets the temperature in the cool-fresh Sets the temperature in the cool-fresh compartment to 29 °F (–2 °C), and the compartment to 40 °F (4 °C), and the humidity to low.
Page 17
Getting to know your appliance en-us Equipment bar Pull-out bin You can remove and adjust the equipment bar: You can remove the bin: Lift equipment bar and remove. Pull out the bin all the way, lift at the front and ■...
Page 18
en-us Getting to know your appliance Cool-fresh bin Ice cube bin You can remove the bin: You can remove the ice cube bin: Pull out the bin all the way, lift at the front and Pull out the frozen food bin (flat) as far as it will ■...
Page 19
Getting to know your appliance en-us Frozen food bin (large) Change water filter or replace with bypass filter: Notes CAUTION When changing, some water will drip from the ■ filter. Wipe drips dry with a soft cloth. To avoid damage to equipment, never remove You can dispose of the used filter with your the partition wall from the frozen food bin ■...
en-us Operating the appliance Setting the temperature 1Operating the appliance Recommended temperature S witching the appliance on O p e r a t i n g t h e a p p l i a n c e Refrigerator compartment: 37 °F (3 °C) Press the ÿ...
Operating the appliance en-us Super freezing Vacation mode With super freezing, the freezer compartment cools If leaving the appliance for a long period, you can down to the coldest temperature setting of the switch it to energy-saving vacation mode. freezer compartment. The appliance automatically sets the following Switch on super freezing, e.g.: temperatures:...
en-us Alarm Setting the light MAlarm You can adjust the brightness levels of the interior lighting from 0 ... 5: D oor alarm A l a r m Note: If the appliance door is left open for a while, a warning sound is switched on and the alarm off 0 = lighting off button flashes.
Cn. ■ sheet, which is available for download at http:// Press the Y/X submenu button repeatedly until www.bosch-home.com together with the submenu display shows SA and the instructions. To do so, enter the E-number of your settings display OF.
en-us Home Connect If the appliance does not automatically connect to Press the menu button. The connect button lights up. The the app, connect the appliance manually: Press the menu button. submenu display shows Cn. The connect button lights up. The Press the Y/X submenu button repeatedly until submenu display shows Cn.
Refrigerator compartment en-us TCool-fresh compartment URefrigerator compartment W ith cool-fresh storage, you can keep fresh C o o l - f r e s h c o m p a r t m e n t foodstuff fresh for up to three times longer than in T he refrigerator compartment is suitable for storing the refrigerator compartment –...
en-us Freezer compartment Observing drinking water quality WFreezer compartment All materials used in the water dispenser are odorless and tasteless. T he freezer compartment is suitable for: F r e e z e r c o m p a r t m e n t storing frozen food If the water has an aftertaste, this may be due to the ■...
Defrosting en-us Notes ;Ice maker Once ready, ice cubes are automatically ■ discharged into the ice cube bin. Ice cube production stops automatically when the ■ maximum filling level of the ice cube bin is The ice maker produces ice cubes. reached.
en-us Cleaning Glass plate partition DCleaning Remove the glass plate: Reach into the back of the recess, lift the glass CAUTION C l e a n i n g plate and push right back. AVOID DAMAGING THE APPLIANCE AND THE Reach into the front of the recess, lift the glass EQUIPMENT.
Page 29
Cleaning en-us Cool-fresh bin cover Telescopic rails Remove the cover: Removing telescopic rails Open the refrigerator compartment doors and Pull out telescopic rail. take out the cool-fresh bin. Push lock in the direction of the arrow. In the cool-fresh compartment, lift the upper cover Detach telescopic rail from the rear pin.
en-us Odors lOdors >Noises N ormal noises I f you notice any unpleasant odors: O d o r s N o i s e s Switch off the appliance with the on/off ÿ power Droning: A motor is running, e.g. refrigerating unit, button.
Faults – what to do? en-us 3 Faults – what to do? B efore you call customer service, use this table to check whether you can rectify the fault yourself. F a u l t s – w h a t t o d o ? Appliance Temperature differs greatly from the set value.
en-us Faults – what to do? Water dispenser The water dispenser is not functioning. No water supply. Check water connection and contact technician if necessary. Low water pressure. Only connect appliance to lines with sufficient water pressure. Kink in water hose. Turn off water supply, straighten out kink.
Customer service en-us 4Customer service B efore you call customer service, please check C u s t o m e r s e r v i c e whether you can correct the fault yourself. If you are unable to rectify the fault, please contact our customer service.