Sony SAT-A55 RM-Y802 Service Manual page 7

Step 6: Connecting the RF Antenna
(SAT-A55 only)
With the SAT-A55 model you can connect the RF Antenna and operate
the Digital Satellite Receiver when installed in a cabinet or from another
room in your house using the remote control. See page 32 for information
about how to set up the Digital Satellite Receiver to use the RF feature.
If you want to use the RF
1
feature RF Antenna
Connect the RF Antenna to
the RF REMOTE jack of the
Digital Satellite Receiver.
Then, place the RF Antenna
in a convenient location.
Digital Satellite Receiver
Notes
• Do not place the RF Antenna
directly on top of the Digital
Satellite Receiver or any other
metal object. For best results,
place the RF Antenna in a visible
location.
• The operating range of the
remote control is about 100 feet
when using the RF feature. This
may decrease due to ambient
reception conditions, weak
batteries, etc.
12
1
Step 7: Connecting the AC Power Cord
After all other connections are complete, connect the AC Power Cord to
the Digital Satellite Receiver. Then connect the AC Power Cord to a
power outlet.
Digital Satellite Receiver
Step 8: Inserting the Access Card
After you insert the Access Card and your Satellite Dish Antenna is
installed, you are ready to begin enjoying digital satellite programming.
Call DIRECTV at 1-800-DIRECTV (347-3288) to begin service.
Digital Satellite Receiver
Access Card
AC Power Cord
to power outlet
13