Advanced Connection: Connecting Your Ir Blaster - Sony DIRECTV RECEIVER SAT-W60 Installation Manual

Advanced Connection: Connecting Your IR
Blaster
Satellite Receiver
VCR (front)
z Tip
If the infrared sensor is not
marked on your VCR, shine a
flashlight into the front panel of
the VCR to locate the sensor.
14
1
IR Sensor
2
To allow the Satellite
1
Receiver to control your VCR
Connect the IR Blaster to the VCR
CONTROL jack on the Satellite
Receiver.
In front of the VCR
2
Place the IR Blaster under and
" "
1 / to 1
2
in front of the VCR.
The IR Blaster must extend just
in front of the infrared sensor
of the VCR.