Programming The Date / Time - Silvercrest Z30412-IT Operating Instructions And Safety Advices

You can reactivate the LC display
pressing the FUNCTION
SELECT
Note: Take the batteries out of the ener-
gy cost meter if you are going to remove
it from the mains outlet socket for more
than 12 hours. By doing this you will
prolong the life of the batteries.
Note: You can reach the desired values
quicker if you press and hold down the
SELECT
can also be used for making the
following settings.
©
Note: The time format can be switched
between 12- and 24-hour formats and
back again in every operating mode in
178 GB/MT
66149_silv_Energiekosten-Messgerät_Content_ES-IT-PT-GB.indd 178 25.05.11 12:21
6 button.
6 button. This quicker method
Programming the
date / time
1 by
2 , SET 3 or