Connecting The Calibrator To A Monitor - LG ACB8300 User Manual

6
MONITOR CALIBRATOR
Connecting the Calibrator to
a Monitor
1
Insert the calibrator USB cable into a USB
input or the calibrator input on the back side
of your monitor. Make sure that your PC and
monitor are connected as below.
Connecting the Monitor to a PC
Before calibrating your monitor with the
y y
calibrator, connect a USB cable between the
USB UPSTREAM port of the monitor and a
USB port on the PC.
(CALIBRATOR)
5 V
Connect to monitor
USB IN H/P
USB UP
0.9 A
2
Place the calibrator in the middle of the
monitor screen.
3
Tilt the monitor back to affix the calibrator.
4
Turn the pendulum of the calibrator to the right
until the cable is affixed. Wind extra cable into
the groove around the pendulum 5 to 7 times
to tidy up, if necessary.
CAUTION
Do not twirl the calibrator or its pendulum.
y y
This may cause a wire to break and/or result
in personal injury.
Remove the calibrator from the monitor be-
y y
fore adjusting the position of the screen.