Clock & Alarm; To Set Date And Time Manually; To Set Alarm; To Set Time Format - Motorola O2 Manual

7. Clock & Alarm
If you have subscribed to your network's Caller Display service, the date and
time is set automatically for all handsets when you receive your first call.
If you are not subscribed to Caller Display service, you can set the date and
time manually.
7.1

To set date and time manually

Press Menu, scroll
1.
2. Date & Time is highlighted. Press Select.
3. Enter the date using the format MM/DD/YY e.g.
2019.
4. Enter the time (HH:MM) and press Save.
If the current time format setting is 12 hour, select
n
5. Press to return to standby mode.
Note
The date and time is retained during a power failure or when the batteries are
discharged.
7.2

To set alarm

When the alarm is set, the display shows
Each handset can have a different alarm setting.
Press Menu, scroll
1.
D
2. Scroll to Alarm
U D
3. Scroll or
Alarm
If is set to On:
U D
Scroll or
Enter the time (HH:MM) and press Save.
If the current time format setting is 12 hour, select
n
4. Press to return to standby mode.
Notes
If the alarm is set to Once,
sounded once.
If the alarm is set to
alarm has sounded. When the alarm goes off, press any key to stop the ring.
7.3

To set time format

1. Press Menu, scroll
D
2. Scroll to Time Format
U D
3. Scroll or
n
4. Press to return to standby mode.
32
D
Clock & Alarm
to
D
Clock & Alarm
to
and press Select.
Off On and press Select.
to or
to Once, Mon - Fri
will disappear from the screen after the alarm has
On Daily Mon -
or
D
to Clock & Alarm
and press Select.
12 Hour 24 Hour
to or
and press Select.
08/04/19
icon.
and press Select.
On Daily then press Select.
or
Fri,
will remain on the screen after the
and press Select.
and press Select.
for 4 August
am or pm.
am or pm.
Clock & Alarm