Applications; Service Shop Setups - Motorola R-2001D Operator's Manual

SECTION 4
APPLICATIONS
4.0 SERVICE SHOP SETUPS
This section of the manual guides troubleshooting, diagnosing, and adjusting communications equipment ranging
from pocket pagers to repeaters. It contains information on how to connect equipment under test to the R-2001 D
Analyzer and how to set controls and indicators to obtain the anticipated CRT display. Maintain a permanent written
log of all measurements and information important to your operation.
CAUTION
These are typical applications and are not all-inclusive. Not every test works with every transceiver. Motorola takes no
responsibility for their accuracy, applicability, or safety. Always refer to your own transceiver's service manual for
recommended test methods and specifications.
The Analyzer's DVM input is unbalanced (ground referenced). Use an appropriate interface to measure balanced cir-
cuits, such as certain receiver audio outputs or telephone lines.
4-1