Sony UP-D75 Operating Instructions Manual
Digital photo printer
Hide thumbs
Also See for UP-D75:
- Brochure & specs (4 pages) ,
- Manual (4 pages) ,
- Brochure & specs (22 pages)
Table of Contents
Related Manuals for Sony UP-D75
Summary of Contents for Sony UP-D75
- Page 1 2-632-686-43(1) Digital Photo Printer Operating Instructions UP-D75 © 2005 Sony Corporation...
- Page 2 Owner's Record The model and serial numbers are located at the rear. Record these number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. ____________________ Serial No. ____________________ WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
-
Page 3: Table Of Contents
Table of Contents Introduction Features ... 4 System Configuration ... 4 Location and Function of Parts and Controls ... 4 Front ... 4 Rear ... 5 Preparation Supplied Accessories ... 6 Assembly ... 6 Connections ... 7 Installing the Printer Driver ... 7 USB Port Connection ... -
Page 4: Introduction
Introduction Features The UP-D75 Digital Photo Printer is a dye sublimation thermal transfer printer providing high quality, high resolution (300 dpi), and high speed printing of computer image data on A4 size paper in full color (256 gradations process and 16.7 million colors). -
Page 5: Rear
H Cursor control buttons (12, 13, 14) Use these buttons to increase or decrease a value and level shown on the menu, or scroll up and down through a menu. I CAL (Calibration) button (14) Press this button to adjust the gray balance. PRINT button (11, 14) Press this button to print the image data stored in the memory of the printer. -
Page 6: Preparation
Preparation Supplied Accessories This printer is packed together with the following accessories. Check that nothing is missing from your package. Paper tray (1) Paper cover (1) Ink ribbon holder (1) Bottom cover (1) Fan cover with a filter (1) Filter Fan cover Thermal Head Claning Kit (1) AC power cord (1) -
Page 7: Connections
For detailed information on how to attach the ferrite cores, see “Attaching a ferrite core to a USB cable” on page 7. UP-D75 (USB) to - AC IN connector... -
Page 8: Operation
Operation Before Printing This section describes the operations that must be performed prior to starting printing. This explanation assumes that the printer has already been installed and that all connections have been made. • Loading an ink ribbon cassette (on this page) •... -
Page 9: Loading The Paper
Wind the spool until the “Start” position marker faces upward. Insert the ink ribbon cassette firmly until it stops. SONY mark faces forwards. Close the ribbon door. If your ink ribbon should tear Repair the tear with transparent tape. There should be no problem with using the remaining portion of the ribbon. - Page 10 Open the tray cover and place the paper in the paper tray. Reverse side with printed logos Print surface protection sheet Riffle the paper. Place the paper in the Pull up the tab and paper tray with the set the spacer printing surface (shiny according to the side with no legends) and...
-
Page 11: Printing
Printing Before printing • Ensure that the printer is properly connected to the computer (page 7). • Ensure that the combination of the ink ribbon and paper is correct (pages 8 and 9). • Ensure that the ink ribbon cassette and paper are properly loaded (page 17). -
Page 12: Setting The Print Quantity
Setting the Print Quantity You can set a print quantity value up to 20 before printing. Press the PRINT QTY button. The print quantity setting menu is displayed in the printer window display. Set the quantity with the G or g button. G : The number increases. -
Page 13: Adjusting The Printouts
Adjusting the Printouts You can adjust the picture quality of a printout with the MENU button before printing. The most recent setting remains effective until changed. Press the MENU button. The COLOR ADJUST menu appears. Display the first item of the printout adjust menu (for RED) in the printer window display by pressing the f button. -
Page 14: Adjusting The Gray Balance
Adjusting the Gray Balance The ink ribbon and the paper are contained in one same package as a pair. The gray balance may differ depending on each pair. It is recommended that you adjust the gray balance each time you reload the ink ribbon and paper. -
Page 15: Miscellaneous
• If the unit malfunctions or if a foreign body falls into the cabinet, disconnect the power immediately and consult your Sony service facility or your Sony dealer. Installation • Avoid placing the unit in a location subject to: –... -
Page 16: Cleaning The Thermal Head
Remove the fan cover, then filter. Filter Fan cover Clean the fan using the vacuum cleaner and the like. Notes • Be careful that the filter will be caught in the cleaner. • Do not rub the net of the fan strongly. Reset the filter and the fan cover on the side panel as they were. -
Page 17: Ink Ribbon And Paper
Cleaning of the thermal head To clean the thermal head, proceed as follows: Remove the ink ribbon cassette from the printer. Attach the cleaning tip to the cleaning tip holder, and install the cleaning tip holder in the printer. The cleaning tip holder can be mounted in the same way as that of the ink ribbon cassette. -
Page 18: Specifications
Specifications Power requirements 100 – 240 V AC, 50/60Hz Input current 3.0 – 1.3 A Operating temperatures 5ºC to 35ºC Approx. 493.8 × 176 × 468.8 mm Dimensions (w/h/d) (19 ½ × 7 × 18 ½ inches) Mass Approx. 18 kg. (39 lb 11 Oz) Printing system Dye transfer sublimation thermal printing... -
Page 19: Troubleshooting
If a problem appears, check the following trouble shooting guide first and perform whatever action is necessary to solve the problem. If the problem persists, turn off the printer and consult with your Sony dealer. Symptom Possible causes and remedies... - Page 20 If you find a jammed sheet on the way inside the printer, slowly pull it out to the right. If the tray cover is in the way, remove it. If the tray cover is in the way, remove it by lifting it up 1, and then pulling it out to the direction of arrow 2.
-
Page 21: Index
Index AC power cord 6 Accessories supplied 6, 18 Adjusting the gray balance 14 Adjusting the printouts 13 BRIGHTNESS 13 COLOR 13 CONTRAST 13 LAMINATE 13 SHARPNESS 13 Assembly 6 Bar codes 9 BLUE 13 Bottom cover 6, 20 BRIGHTNESS 13 Cable stopper securing USB cable 7 CAL button 14... - Page 22 Sony Corporation...