Step 6: Settings For The Digital Output Signal - Sony D-VM1 Operating Instructions (primary manual) Operating Instructions Manual

12 ( 27 )
18 ( 34 )
C 00:09:5 7
QUICK
CUSTOM
QUICK
6
Press X/x to select "QUICK," then
press ENTER.
The Setup Display used for selecting the
aspect ratio of the TV appears.
CUSTOM SETUP
TV TYPE:
PARENTAL CONTROL
ANGLE MARK:
AUDIO DRC:
DIGITAL OUT
DOLBY DIGITAL:
MPEG:
DTS:
7
Press X/x to select the item.
TV Type Select
A wide-screen TV 16:9
or 4:3 standard TV
with the wide-
screen mode
4:3 standard TV 4:3 LETTER
BOX or 4:3 PAN
SCAN
8
Press ENTER.
Quick Setup is finished.
STOP
DVD
16:9
16:9
4:3 LETTER BOX
4:3 PAN SCAN
D–PCM
PCM
OFF
Page
65
65
Step 6: Settings for the
Digital Output Signal
To enjoy surround sound effects, the
following items must be set as described
below for the audio connection you selected
in pages 54 to 58 (
B
Refer to page 63 for details on using the
Setup Display.
Audio Connection (pages 53 to 58)
A C-1
B-1
No settings are needed because no optical
digital cord is used.
B-2 C-2
Item Select
DOLBY D-PCM
DIGITAL
MPEG PCM
DTS OFF
If the AV amplifier (receiver) has a
D
Dolby Digital decoder
Item Select
DOLBY DIGITAL DOLBY DIGITAL 66
DTS OFF
Set "SOUND MODE" to "NORMAL" (page 43).
If the AV amplifier (receiver) has a
D
DTS decoder
Item Select
DTS ON
Set "SOUND MODE" to "NORMAL" (page 43).
through ).
D
Page
66
66
66
Page
66
Page
66
,
continued
61