Connecting To An Amplifier Equipped With A Dolby Digital Decoder - Sony DPS5032N Operating Instructions Manual

Connecting to an amplifier equipped with a Dolby Digital decoder

You must set the LINE SELECT
switch to the "Out" mode
Right side of unit
IN OUT
V O L U M E P H O N E S A U D I O V I D E O LINE SELECT S-VIDEO OUT
To AUDIO IN/OUT To digital audio input
Optical cable (Not supplied)
To enjoy Dolby Digital sound from this DVD
player you need the following:
• DVD recorded in Dolby Digital
• 6 channel receiver equipped with a Dolby Digital
decoder, or Dolby Digital processor and power
receiver
• 5 speakers and 1 sub woofer
• Set the Digital Audio Output of this DVD player to
"Dolby Digital" from the SETUP menu
Front speaker
(right)
Amplifier equipped with a
DC IN 9.8V
Dolby Digital decoder
(optical)
Center
speaker
Front speaker
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic", and the double-D symbol are
trademarks of Dolby Laboratories.
58
Sub woofer
Rear speaker
(right surround)
Rear speaker
(left surround)
(left)