Cisco AMP PC3000 Hardware Installation Manual page 31

Mount the Chassis
•
•
•
Unpack and Inspect the Chassis
Note
The chassis is thoroughly inspected before shipment. If any damage occurred during transportation or any
items are missing, contact your customer service representative immediately. Keep the shipping container in
case you need to send the chassis back due to damage.
See Package Contents, on page 2
Step 1
Remove the chassis from its cardboard container and save all packaging material.
Step 2 Compare the shipment to the equipment list provided by your customer service representative. Verify that you have all
items.
Step 3
Check for damage and report any discrepancies or damage to your customer service representative. Have the following
information ready:
• Invoice number of shipper (see the packing slip)
• Model and serial number of the damaged unit
• Description of damage
• Effect of damage on the installation
Rack-Mount the Chassis
You can install the chassis in a rack using the Cisco rack kit.
Unpack and Inspect the Chassis, on page 27
Rack-Mount the Chassis, on page 27
Connect Cables, Turn on Power, and Verify Connectivity, on page 30
C H A P T E R
for a list of what shipped with the chassis.
Cisco AMP PC3000 Hardware Installation Guide
3
27