Performing A Hotsync ® Operation Between Your Old Clié Handheld And The New Palm Desktop For Clié Software - Sony CLIE PEG-NR70V/U, PEG-NR70/U Operating Instructions Manual

Using data of another Sony CLIÉ Handheld
Performing a HotSync
handheld and the new Palm Desktop for CLIÉ software
If you have a CLIÉ handheld other than this model (PEG-NR70V/U or PEG-
NR70/U), you can perform a HotSync operation between that CLIÉ
handheld (PEG-N760C, PEG-T615C, PEG-T415) and the Palm Desktop for
CLIÉ software supplied with this model.
After setting up your CLIÉ handheld as indicated in the Read This First
manual, perform the HotSync operation as indicated on page 108 of this
manual.
If you have any trouble with the HotSync operation, perform the following.
• Check the Windows task tray to make sure that Local USB is selected.
• Check the Windows task tray to make sure that the USB Switcher is
running (PEG-S300, PEG-N710C only).
Note
The Palm Desktop for CLIÉ software supplied with this CLIÉ handheld (PEG-NR70V/
U or PEG-NR70/U) does not support Expense.
Chapter6
Additional information
®
operation between your old CLIÉ
198