Removing And Installing A Memory Module - Sony VAIO VPCL2 Series User Manual

Upgrading Your VAIO Computer >
Adding and Removing Memory

Removing and Installing a Memory Module

To change or add a memory module
1 Shut down the computer, turn off all peripheral devices, and disconnect the AC adapter and the peripheral devices from
the power sources.
2 Gently face down your computer on a flat surface and wait about an hour until the computer cools down.
!
When facing down your computer, be sure to place it on a soft cloth to avoid damage to the screen frame.
3 Remove the four screws and take the foot stand off the computer.
!
The foot stand is securely attached to your computer. While holding down the bottom part of the main unit, firmly grasp the foot stand and pull the
stand out of the unit.
!
Be careful not to lose the removed screws.
4 Touch a metal object to discharge static electricity.
n 133 N