Your Clié Handheld; Setting Up Your Clié™ Handheld; Step 1: Charging Your Clié Handheld - Sony PEG-TH55 CLIE Handbook (primary manual) Operating Instructions Manual

Setting up your CLIÉ™ handheld
Perform the following before setting up your CLIÉ handheld.
Step 1: Charging your CLIÉ handheld
Before using your CLIÉ handheld for the first time,
make sure you fully charge the battery.
1
Connect the AC power adapter to the DC IN connector of
the plug adapter.
2
Connect the plug adapter to the interface connector of
your CLIÉ handheld .
3
Connect the AC cord to the AC power adapter (1). Then,
plug the AC cord into a wall outlet (2).
The POWER LED of your CLIÉ handheld turns on when charging starts.
It takes about five hours to fully charge your CLIÉ handheld for the first time.
The POWER LED turns off when charging is complete.
Tip
Subsequent charges will require less time if you charge your CLIÉ handheld
frequently.
8
To a wall
outlet