About The Access Point Password - Sony PCWA-A500 Operating Instructions Manual

5ghz wireless lan access point
Hide thumbs Also See for PCWA-A500:
Table of Contents

Advertisement

Display the Access Point setup page by entering the IP
address in the web browser.
1
2
3

About the Access Point password

You can set two types of Access Point passwords, administrator password
and guest password. Neither of these passwords is set when the Access
Point is shipped from the factory. Therefore, all users are able to configure
Access Point settings and display the status of the Access Point. If you want
to restrict the privileges of users, you can set a password as described on
the Easy Setup page or the various mode setting pages of Advanced Setup.
Passwords and restrictions on executable functions are as follows.
Password types and ability to use executable functions
Function
Status display
Easy Setup
Advanced Setup
Display Indicator
Firmware update
18
Connect the Access Point to the AC adapter.
z
Hint
There is no power switch on the Access Point. Refer to the Quick Start Guide
(separate sheet) when connecting the Access Point to the AC adapter.
Start up your web browser.
Type "http://192.168.11.1/" in the URL entry field, then press
Enter.
The Access Point setup page is displayed.
z
Hints
• The IP address above is the factory default setting for the Access Point. If the IP
address has been changed, contact your network administrator.
• When using the NAT Router mode, the Access Point IP address is set to the
default gateway for that network.
• When using the Bridge mode, contact your network administrator for the Access
Point IP address.
Administrator
Possible
Possible
Possible
Possible
Possible
Guest
Possible
Not possible
Not possible
Not possible
Not possible

Advertisement

Table of Contents
loading

Table of Contents