Sony PCWA-A100 Operating Instructions Manual page 14

1
z Tip
You may also connect computers to the Access Point via a hub. Use the 10BASE-T
connector to build a wired LAN environment in addition to a wireless LAN
environment. This makes file sharing available among wireless and wired LAN
clients.
Internet
Service
Provider
2
Notes
• A category 5 Ethernet cable is recommended.
• Use a flexible Ethernet cable when attaching a unit stand to the Access Point.
• To connect a hub to the 10BASE-T connector on the Access Point, use a
• To connect a computer directly to the 10BASE-T connector on the Access
14
Connect the telephone cable to the LINE/PHONE connector.
Telephone cable
(supplied)
Telephone jack
splitter (supplied)
To the telephone
line outlet
Internet
To LINE/
PHONE
connector
To 10BASE-T
connector
Connect the AC power adapter (page 19).
Using an inflexible cable will not allow you to attach the unit stand.
straight-through Ethernet cable (same order color code when side by side).
Point, use a crossover Ethernet cable (reverse order color code when side by
side).
LINE/
PHONE
To LINE/PHONE connector
HUB
DC IN 5V