Sony PCWA-C500 Operating Instructions Manual page 32

4
32
[ASCII/Hex]
This is the format for entering the password (WEP key) required
when connecting to networks where WEP is enabled. You can select
ASCII (alphanumeric characters, and may include symbols) or Hex
(hexadecimal notation).
[Length]
This is the length (bit length) for the WEP key (password) required
when connecting to networks where WEP is enabled. You can select
from 40 bits or 104 bits. Generally, the longer the bit length, the
better the security.
[Key]
This is the password required when connecting to networks where
WEP is enabled. The number of characters you can enter differs
depending on the ASCII/Hex and Length settings. (For more
information, refer to following table).
ASCII/Hex
ASCII
Hex
When all of the items are set, click Next.
The settings that you have made are displayed.
40 bits 104 bits
5 characters 13 characters
10 characters 26 characters