Siemens CP 1243-8 IRC Operating Instructions Manual page 28

Application and properties
1.7 Configuration examples
SMS messages and e-mails
Figure 1-6
SMS
The CP can send SMS messages to a mobile phone. SMS messages are generated and
sent due to events. You will find the description of the configuration in the following sections:
Configuring data points and messages (Page 68)
Messages (Page 84)
E-mails
The CP can send e-mails to a PC with an Internet connection or a mobile phone. The
mechanisms for this are as follows:
● E-mails that are generated by the telecontrol application.
E-mails are generated and sent due to events. You will find the description of the
configuration in the following sections:
Configuring data points and messages (Page 68)
Messages (Page 84)
TheE-mail configuration (Page 88)
● E-mails sent as a result of calling the program block TMAIL_C.
You will find information on the blocks in the section Programming the program blocks
(OUC) (Page 97). You will find the description of the programming in the STEP 7
information system.
28
Sending messages by SMS from an S7-1200 station
Operating Instructions, 06/2015, C79000-G8976-C385-01
CP 1243-8 IRC