Assigning Tracks Or Groups As A New Group (Group Set) - Sony MZ-RH10 Hi-MD Music Transfer Version 1 for Mac (User Manual) Operating Instructions Manual

1)
Functions
To move the cursor
up or down
To enter a letter.
To insert a blank
space.
To delete a letter.
To move the cursor
from the character
palette to the letter
input area.
To switch between
capital letters and
.
small letters
1)
Functions of the buttons or the control may
differ depending on when the cursor is in the
letter input area or in the character palette.
5
Repeat step 4, and then enter all
characters of the label name.
6
Press the jog dial for 2 seconds or
more to enter the title
Re-labeling
You can change the titles by doing the
procedure for "Labeling" (page 48).
Notes
•
The recorder is able to display, but cannot
label using Japanese "Katakana" characters.
•
The recorder cannot rewrite a disc or track
name of more than 200 letters that was created
by another device (in MD mode only).
Operations
Turn the jog dial.
Press the jog dial
(N/ENT).
Press VOL +.
Press VOL –.
Press x.
Press X.
.
Assigning tracks or
groups as a new group
(Group Set)
With this function, you can assign
existing tracks or groups to a new group,
and also you can assign a track that
currently belongs to no group to an
existing group.
You can create a maximum of 255 groups
on a disc used in Hi-MD mode and 99
groups on a disc used in MD mode.
Disc
Track number
1 2 3 4 5 6
Assigning tracks 1 to 3 to a new
group
Assigning group 1 and group 2 to a
new group
Disc
Group 1
1 2 3 4 5 6
Registration of non-consecutive tracks is
not possible (for example, track 3 and
tracks 7 and 8 cannot be assigned to a new
group).
It is not possible to make a new group if
the first track or last track of the group has
been selected from the middle of an
existing group.
Track numbers appear according to their
order on the disc, not their order within
the group.
Group 2
Group 1
7 8 9 101112
Group 2
7 8 9 101112
49