Sony 4-166-309-11(1) Operating Instructions Manual page 84

Symptom
You cannot divide a
message.
When recording from other
equipment, the input level is
too strong or not strong
enough.
Playback speed is too fast or
too slow.
"--:--" is displayed.
"--Y--M--D" or "--:--" is
displayed on the REC DATE
display.
There are fewer menu items
displayed in the menu mode.
The remaining time
displayed in the display
window is shorter than that
displayed in the supplied
Digital Voice Editor
software.
84
GB
Remedy
• You need a certain amount of free space in the memory to divide a
message.
• If 99 messages have been recorded in a folder, you cannot divide a
message in that folder. 99 messages have been recorded in the
selected folder. Erase some of the messages (page 20) or erase all
the messages after you store them on your computer.
• You may not be able to divide a message at the beginning or at the
end of the message because of system limitations.
• If you divide a message frequently, the unit may become unable to
divide the message further.
• Connect the headphone jack of other equipment to the
(microphone) jack of the IC recorder and adjust the volume
m
level on the piece of equipment connected to the IC recorder.
• The playback speed is adjusted in DPC. Adjust the speed in DPC
again in the menu (page 36).
• You have not set the clock (page 12).
• The date of recording will not be displayed if you recorded the
message when the clock was not set.
• The menu items displayed are different depending on the
operation modes (stop mode, playback mode and recording mode)
(page 52).
• The IC recorder requires a certain amount of memory for system
operation. That amount is subtracted from the remaining time,
which is the reason for the difference.