Table of Contents
Advertisement
Press and hold
the sound level continuously. The
sound level is also displayed as a
number below the level meter.
5
Make other settings for recording
such as "LIMITER," "LCF (LOW CUT),"
etc., in the menu.
6
Start recording.
Press
(record/pause).
The operation indicator lights in red
and "
" is displayed.
You do not need to press and hold
(record/pause) while recording.
Speak into the built-in microphone.
7
Press
(stop) to stop recording.
GB
OVER indicator
Adjust the maximum
level of the sound to
about –12 dB.
or
to change
Tip
The settings you have set for the manual
recording mode are saved after the recording
is finished or the recording level is switched to
settings other than "MANUAL, " such as "LOW . "
You can start the manual recoding with the same
settings the next time.
Notes
In the manual recording mode, you cannot
record with the VOR function (page 42).
In the manual recording mode, you cannot
review the current recording, even if you
press
.
Hide quick links:
Advertisement
Table of Contents
