Sony 4-113-168-11(2) Operating Instructions Manual page 45

When the set date and time
comes
At the set time, the alarm will sound
for about 10 seconds and the selected
message will be played back. (If you have
selected "B-ONLY, " only the alarm will
sound.)
During playback, "ALARM" will flash in the
display window.
When the playback ends, the IC recorder
will stop automatically at the beginning
of that message.
To listen to the same message
again
Press  PLAY/STOP•ENTER, and the
same message will be played back from
the beginning.
To stop the alarm before the
playback starts

Press (stop) while the alarm sound is
heard. You can stop the alarm playback
even when the HOLD function is
activated.
To change the alarm setting
Start from step 2 on page 43.
To cancel the alarm setting
Follow steps 1 and 2-

step 2- , press – 
"OFF, " and press  PLAY/STOP•ENTER.
The alarm will be cancelled, and the
alarm indicator will disappear from the
display window.

on page 44. In
or  + to select

GB