Sony IPELA PCS-TL33 Manual page 3

When "Enable IPELA VC Link" is set to "On," the
"NAT Mode" item on Page 2 of the IPELA VC Link
menu automatically switches to "Auto (UPnP)," and
"Line I/F" and "Number Display" switch to "IPELA
VC Link." In addition, the "LAN Bandwidth" item on
Page 3 automatically switches to "512 kbps."
IPELA VC Link
LAN
IPELA VC Link Setup
IPELA VC Link
NAT Mode
SIP
Line I/F
Number Display
Right-click to display the help file.
IPELA VC Link
LAN
IPELA VC Link Setup
IPELA VC Link
Dial
SIP
Answer
Right-click to display the help file.
3
Click [OK].
The message "The NAT settings, line interface, and
LAN Bandwidth will be changed. Disabling the Web
Access setting is recommended." appears.
Note
The Web Access setting can be changed on the
Administrator Setup menu.
4
Click [OK] in the message dialog box.
The first time the settings are configured the system
resets and the launcher menu appears.
IPELA VC Link
Point to and click on the icon with the mouse.
2/3
Auto (UPnP)
0.0.0.0
WAN IP Address
Port Number 5060
IPELA VC Link
IPELA VC Link :
OK Cancel
IP: 012.345.678.912
3/3
512kbps
LAN Bandwidth
512
Input LAN Bandwidth
LAN Bandwidth
512kbps
Input LAN Bandwidth 512
OK Cancel
IP: 012.345.678.912
IPELA VC Link : 12345678
To confirm activation of the IPELA VC Link
function
See Page 4 of the Status & Info menu.
When the IPELA VC Link function is activated, the
IPELA VC Link setting and status appear on Page 4 of the
Status & Info menu.
Note
If no communications have been held since the power was
turned on, the IPELA VC Link setting and status appear on
Page 2.
Preparing for a Videoconference With the IPELA VC Link Function
3