To Connect A Digital Video Camera Recorder; Notes On I.link Devices - Sony PCGA-UMS1 Primary User Manual

Change text in this variable definition to document title.

To connect a digital video camera recorder

1 Plug one end of the i.LINK cable (not supplied) into the i.LINK port on the
left side of the notebook
2 Next, plug the other end into the DV In/Out port on the digital video camera
recorder.
Connecting digital video camera recorder to i.LINK port
Digital video
camera recorder
To DV In/Out

Notes on i.LINK devices

The above figure displays a connection to a Sony digital video camera
recorder; your digital video camera recorder may need to be connected
differently.
Only Sony digital video camera ports labeled "DV In/Out" or "i.LINK" are
compatible i.LINK devices.
Do not connect more than one digital video camera at a time. The software
supplied with your notebook will not recognize multiple cameras.
The i.LINK port on the notebook does not supply power to external devices.
If the external device requires power from the i.LINK port, you cannot use
the device with the notebook.
The notebook supports transfer rates up to 400 Mbps; however, the actual
transfer rate is the lowest transfer rate of the external device.
60
To i.LINK
i.LINK cable
(optional)