Changing the Rail Position
WARNING
The rail is heavy and can suddenly fall onto
the machine frame if you release the handle
when raising or lowering the rail.
Control the rail by the handle, and keep your
hands away from the machine frame and
pinch points when raising or lowering the rail.
Raising the Rail to the Vertical
Position
You can rotate the rail and use it in the horizontal or
vertical position.
1. Park the machine on a level surface and shut
off the engine.
2. Chock the front and back of the tires to prevent
the machine from moving.
3. Remove the lock pin
4. Rotate the rail so that it is vertical, against the
base of the machine
5. Rotate the vertical lock lever to the closed
position to secure the lower rail in place
10).
Figure 10
Lowering the Rail to the Horizontal
Position
1. Rotate the vertical lock lever to the open position
(Figure
11).
(Figure
10).
(Figure
10).
(Figure
2. Carefully rotate the rail into the horizontal
position
(Figure
3. Install the lock pin to secure the rail
Splitting a Log
WARNING
This machine is capable of amputating hands
and feet.
Always stand in the operating area shown in
Figure
12.
g206125
1. Operating area
1. Park the machine on a level surface.
11
11).
(Figure
Figure 11
Figure 12
11).
g206124
g206500