Related Manuals for Sony 4-178-247-13(2)
Summary of Contents for Sony 4-178-247-13(2)
- Page 1 4-178-247-13(2) Blu-ray Disc/DVD Home Theatre System Operating Instructions BDV-E870 / E370 ©2010 Sony Corporation...
- Page 2 EU directives. The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or...
-
Page 3: Copyrights And Trademarks
Electric Industrial Co., Ltd. and Sony Corporation. • “S-AIR” and its logo are trademarks of Sony Corporation. • , “XMB,” and “xross media bar” are trademarks of Sony Corporation and Sony Computer Entertainment Inc. • “PLAYSTATION” is a trademark of Sony Computer Entertainment Inc. -
Page 4: About These Operating Instructions
• “PhotoTV HD” and the “PhotoTV HD” logo are trademarks of Sony Corporation. • MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson. • iPod is a trademark of Apple Inc., registered in the U.S. and other countries. -
Page 5: Table Of Contents
Table of Contents About These Operating Instructions ... 4 Unpacking ... 6 Index to Parts and Control ... 8 Getting Started Step 1: Installing the System... 13 Step 2: Connecting the System... 19 Step 3: Performing the Easy Setup... 25 Step 4: Selecting the Source ... -
Page 6: Unpacking
Unpacking BDV-E870 • Front speakers (2) • Surround speakers (2) • Center speaker (1) • Subwoofer (1) • FM wire antenna (aerial) (1) • Speaker cords (3, blue/gray/ green) • Video cord (1) • Remote commander (remote) (1) • R6 (size AA) batteries (2) •... - Page 7 BDV-E370 • Front speakers (2) • Surround speakers (2) • Center speaker (1) • Subwoofer (1) Preparing the remote Insert two R6 (size AA) batteries (supplied) by matching the 3 and # ends on the batteries to the markings inside the compartment. •...
-
Page 8: Index To Parts And Control
Index to Parts and Control For more information, refer to the pages indicated in parentheses. Front panel A "/1 (on/standby) Turns on the unit, or sets it to standby mode. B Play operation buttons Z (open/close) (page 29) Opens or closes the disc tray. N (play) Starts or re-starts playback (resume play). -
Page 9: Front Panel Display
Front panel display About the indications in the front panel display A Displays the current sound format. B Lights up when the system is playing via the PARTY STREAMING function. C Lights up when outputting 1920 × 1080p/24 Hz video signals. D Lights up when outputting 720p/1080i/ 1080p video signals from the HDMI OUT jack or 720p/1080i video signals... -
Page 10: Rear Panel
Rear panel SPEAKERS FRONT R FRONT L SUBWOOFER CENTER (USB) port (page 30) B LAN (100) terminal (page 24) C COMPONENT VIDEO OUT jacks (page D VIDEO OUT jack (page 20) E HDMI OUT jack (page 20) F EZW-T100 slot (page 41) G AUDIO (AUDIO IN L/R) jacks (page 22) H A.CAL MIC jack (pages 25, 48) VIDEO OUT... -
Page 11: Remote Control
Remote control ONE-TOUCH THEATRE PLAY BRAVIA Sync SLEEP SYSTEM MENU D.TUNING TOP MENU POP UP/ MENU RETURN OPTIONS FUNCTION SOUND MODE HOME PRESET PRESET TUNING TUNING DISPLAY +, and N buttons have a Number 5, tactile dot. Use the tactile dot as a reference when operating the remote. - Page 12 m/M (fast reverse/fast forward) Fast reverse/fast forward the disc during playback. Each time you press the button, search speed changes. Activates slow-motion play when pressed for more than one second in pause mode. Plays one frame at a time when pressed in pause mode.
-
Page 13: Getting Started
Getting Started Step 1: Installing the System Positioning the speakers For the best possible surround sound, place all speakers at the same distance from the listening position (A). The distance can be between 0.0 to 7.0 meters. If you cannot place the center speaker and surround speakers at the same distance as (A), place them within 7.0 meters of the listening position. -
Page 14: Installing The Speakers On A Wall
Install the speakers on a vertical and flat wall where reinforcement is applied. • Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc. - Page 15 To disassemble the speaker (Front speakers of BDV-E870 only) Disconnect the speaker cords from the speaker. Rear of the speaker Remove the screw (pre-installed) at the rear of the speaker. This screw is used when reassembling the speaker. Be sure not to lose the screw. Screw Disassemble the speaker by lifting the upper part of the speaker.
- Page 16 Pull out the speaker cord from the bottom of the lower part of the speaker. The removed speaker cord is used when installing the speaker on a wall. Lower part of the speaker Speaker cord Remove the protection paper from the speaker-bottom cover, then attach the speaker- bottom cover to the bottom of the upper part of the speaker.
- Page 17 To install the speakers on a wall Before installing the speakers on a wall, connect the speaker cord to the speaker. Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with the color tube to 3, and the speaker cord without the color tube to #. Color tube Front left speaker (L): White Front right speaker (R): Red...
- Page 18 Fasten the screws to the wall. BDV-E870 For the front speakers 8 to 10 mm For the center speaker 8 to 10 mm For the surround speakers 8 to 10 mm Hang the speakers on the screws. 5 mm 10 mm Rear of the speaker BDV-E370 For the center speaker...
-
Page 19: Step 2: Connecting The System
Step 2: Connecting the System For connecting the system, read the information on the following pages. Do not connect the AC power cord (mains lead) of the unit to a wall outlet (mains) until all the other connections are made. Note •... -
Page 20: Connecting The Tv (Video Connection)
Connecting the TV (Video connection) This connection sends a video signal to the TV. Depending on the jacks on your TV, select the connection method. Rear panel of the unit B Component video cable (not supplied) C Video cord (supplied) To the component video input jacks of the TV. -
Page 21: Connecting The Tv (Audio Connection)
Connecting the TV (Audio connection) This connection sends an audio signal to the unit from the TV. To listen to TV sound via the system, perform this connection. Rear panel of the unit Digital optical cord (not supplied) To the digital optical out jack of the TV. -
Page 22: Connecting The Other Components
Connecting the other components When you connect the system and other components to the TV, video signals from the system and the components are sent to the TV, and audio signals from the components are sent to the system as follows. -
Page 23: Connecting The Antenna (Aerial)
Connecting the antenna (aerial) To connect the antenna (aerial) IA L C O A X N N A A N T E Note • Be sure to fully extend the FM wire antenna (aerial). • After connecting the FM wire antenna (aerial), keep it as horizontal as possible. •... -
Page 24: Connecting To The Network
ADSL modem/ cable modem router USB Wireless Setup Use a wireless LAN via the USB Wireless LAN Adapter (Sony UWA-BR100* only) (not supplied). The USB Wireless LAN Adapter may not be available in some regions/countries. * As of January 2010. -
Page 25: Step 3: Performing The Easy Setup
Step 3: Performing the Easy Setup Before performing Step 3 Make sure all connections are secure, and then connect the AC power cord (mains lead). Follow the Steps below to make the basic adjustments for using the system. Displayed items vary depending on the country model. -
Page 26: Step 4: Selecting The Source
Perform the [Easy Setup]. Follow the on-screen instructions to make the basic settings using C/X/x/c, and For details about [Auto Calibration] settings in [Easy Setup], see “Calibrating the Appropriate Settings Automatically” (page 48). To recall the Easy Setup Display Press HOME. The home menu appears on the TV screen. -
Page 27: Step 5: Enjoying Surround Sound
Step 5: Enjoying Surround Sound After performing the previous Steps and starting playback, you can easily enjoy surround sound. You can also select pre-programmed surround settings that are tailored to different kinds of sound sources. They bring the exciting and powerful sound of movie theaters into your home. SYSTEM MENU X/x/c, Selecting surround settings based on your listening preference... - Page 28 Sound from Surround setting “A.F.D. MULTI” (AUTO FORMAT DIRECT MULTI) “PRO LOGIC” “PLII MOVIE” “NEO6 CIN” “NEO6 MUS” “2CH STEREO” Note • When you select “A.F.D. MULTI,” depending on the disc or source, the beginning of the sound may be cut off while the optimum mode is automatically selected.
-
Page 29: Playback
Playback Playing a Disc For playable discs, see “Playable Discs” (page 68). Switch the input selector on your TV so that the signal from the system appears on your TV screen. Press Z, and place a disc on the disc tray. -
Page 30: Playing From A Usb Device
Displaying the play information You can check the playback information, etc., by pressing DISPLAY. The displayed information differs depending on the disc type and player status. Example: when playing a BD-ROM A Output resolution/Video frequency B Title number or name C The currently selected audio setting D Available functions ( subtitle) -
Page 31: Enjoying An Ipod
• The iPod is charged when connected to the system while the system is turned on. • You cannot transfer songs onto the iPod. • Sony cannot accept responsibility in the event that data recorded to iPod is lost or damaged when using an iPod connected to this unit. -
Page 32: Playing Via A Network
• If [Party Auto Start] (page 58) is not displayed on the for playback operations. You can play the same audio at the same time across all Sony components which are Playing files stored on a DLNA server (DLNA Player) displayed on the TV screen, this function will be available via a future update. - Page 33 (for the party host only) You can use other components to play the content that is playing on the system. Turn on the system and other Sony components compatible with the PARTY STREAMING function. Make sure that each component is connected to the network.
-
Page 34: Available Options
Available Options Various settings and playback operations are available by pressing OPTIONS. The available items differ depending on the situation. Common options Items Details [Playback History] Displays titles/tracks in the playback history of a BD-ROM/DVD-ROM/ CD-DA (music CD) using Gracenote technology. [Search History] Searches for related information based on... - Page 35 [Photo] only Items Details [Slideshow] Starts a slideshow. [Slideshow Speed] Changes the slideshow speed. [Slideshow Effect] Sets the effect when playing a slideshow. [Slideshow BGM] • [Off]: Turns off the function. • [My Music from USB]: Sets the music files registered in [Add Slideshow BGM].
-
Page 36: Sound Adjustment
Sound Adjustment Selecting the Effect to Suit the Source You can select a suitable sound mode for movies or music. Press SOUND MODE repeatedly during playback until the desired mode appears in the front panel display. • “AUTO”: The system selects “MOVIE” or “MUSIC”... -
Page 37: Enjoying Multiplex Broadcast Sound
displayed two or more times, the BD/DVD VIDEO is recorded in multiple audio formats. x DVD-VR The types of sound tracks recorded on a disc are displayed. Example: • [ Stereo] • [ Stereo (Audio1)] • [ Stereo (Audio2)] • [ Main] •... -
Page 38: Reinforcing Bass Frequencies
Press X/x repeatedly until “NIGHT MODE” appears in the front panel display, then press Press X/x to select a setting. • “NIGHT ON”: On. • “NIGHT OFF”: Off. Press SYSTEM MENU. The system menu turns off. Note • When sound is output from the center speaker, this effect is more pronounced, as speech (movie dialog, etc.) is easy to hear. -
Page 39: Tuner
HOME FUNCTION 2 +/– Current station Current band and preset number FM 7 88.00 SONY FM Station name (European and Russian models only) Press FUNCTION repeatedly until “TUNER FM” appears in the front panel display. Select the radio station. Automatic tuning Press and hold TUNING +/–... -
Page 40: Using The Radio Data System (Rds)
Press X/x to select the preset number you want. • You can select the preset number directly by pressing the number buttons. Press “COMPLETE” appears in the front panel display, and the station is stored. Repeat Steps 2 to 6 to store other stations. -
Page 41: External Audio Device
External Audio Device Using an S-AIR Product When you purchase the S-AIR product, you need to perform the following settings to activate wireless transmission. About S-AIR products There are two types of S-AIR product. • S-AIR main unit (this unit): This is for transmitting sound. - Page 42 S-AIR sub unit, such as a surround amplifier or S-AIR receiver, see the operating instructions of the S-AIR sub unit. • When you change the S-AIR configuration, Sony recommends that you perform [Auto Calibration]. For details, see “Calibrating the Appropriate Settings Automatically”...
- Page 43 Enjoying the system’s sound in another room For the S-AIR receiver You can enjoy the system’s sound in another room by using the S-AIR receiver. Press HOME. The home menu appears on the TV screen. Press C/c to select [Setup]. Press X/x to select [System Settings], then press Press X/x to select [S-AIR Settings],...
- Page 44 Identifying the unit with a specific S-AIR sub unit (Pairing operation) For the surround amplifier For the S-AIR receiver When using S-AIR products, neighbors may also receive your system’s sound if IDs are the same, or you may receive sound from neighbors. To prevent this, you can identify the unit with a specific S-AIR sub unit by performing the pairing operation.
- Page 45 • [Auto]: Normally select this. The system changes [RF Change] to [On] or [Off] automatically. • [On]: The system transmits sound by searching for the better channel for transmitting. • [Off]: The system transmits sound by fixing the channel for transmitting. Press The setting is made.
-
Page 46: Other Operations
HDMI function may not work. Refer to the operating instructions supplied with the component. • The Control for HDMI function may not work if you connect other than a Sony component, even if the component is compatible with the Control for HDMI function. - Page 47 Press X/x to select the setting, then press • [On]: On. • [Off]: Off. Turning the system off in sync with the TV (System Power Off) When you turn the TV off by using the POWER button on the TV’s remote or TV "/1 on the system’s remote, the system turns off automatically.
-
Page 48: Calibrating The Appropriate Settings Automatically
compatible with the Audio Return Channel function. You can enjoy TV sound via the system by using just one HDMI cable. For details, see [Audio Return Channel] (page 56). Operating the system via the TV remote (Remote Easy Control) You can control the basic functions of the system via the TV remote when the system’s video output is displayed on the TV screen. -
Page 49: Setting The Speakers
location, such as another room, proper measurement will not be obtained. • When you use the Wireless Surround Speaker Kit (WAHT-SBP2, optional) for the surround back speakers (page 14), install the speakers in appropriate location and turn the surround amplifier on. To use the surround back speakers, set [Surround Back] in [Speaker Settings] to [Yes] (page 49) Confirm the conclusions of [Auto... - Page 50 The speakers in the illustration correspond to the following: 1Center speaker 2Front left speaker (L) 3Front right speaker (R) 4Subwoofer 5Surround left speaker (L) 6Surround right speaker (R) 7Surround back left speaker (L) (optional) 8Surround back right speaker (R) (optional) [Front Left/Right] 3.0 m: Set the front speaker distance.
-
Page 51: Using The Sleep Timer
By adjusting the remote signal, you can control your TV with the supplied remote. Note • When you replace the batteries of the remote, the code number may reset itself to the default (SONY) setting. Reset the appropriate code number. Preparing the remote for controlling the TV Press and hold TV [/1 while entering your TV’s manufacturer’s code (see the table) -
Page 52: Settings And Adjustments
You can update and improve the functions of the system. For information about update functions, refer to the following website: For customers in Europe and Russia Original http://support.sony-europe.com/ Letter Box Auto For customers in Asia and Australia http://www.sony-asia.com/support Explanation [Audio Settings] (page 54) -
Page 53: [Screen Settings]
[Screen Settings] x [3D Output Setting] [Auto]: Normally select this. [Off]: Select this to display all contents in 2D. x [TV Screen Size Setting for 3D] Sets the screen size of your 3D compatible TV. x [TV Type] [16:9]: Select this when connecting to a wide- screen TV or a TV with a wide-mode function. -
Page 54: [Audio Settings]
[Frame]: The picture, including subjects that do not move dynamically, is output in high resolution. [Audio Settings] x [BD Audio MIX Setting] [On]: Outputs the audio obtained by mixing the interactive audio and secondary audio to the primary audio. [Off]: Outputs the primary audio only. Select this when outputting HD audio signals to an AV receiver. -
Page 55: [Bd/Dvd Viewing Settings]
[BD/DVD Viewing Settings] You can make detailed settings for BD/DVD playback. x [BD/DVD Menu] You can select the default menu language for BD-ROMs or DVD VIDEOs. When you select [Select Language Code], the display for entering the language code appears. Enter the code for your language by referring to “Language Code List”... -
Page 56: [Music Settings]
[Dimmer] [Bright]: Bright lighting. [Dark]: Low lighting. x [HDMI Settings] By connecting Sony components that are compatible with the Control for HDMI function with an HDMI cable, operation is simplified. For details, see “Using the Control for HDMI Function for “BRAVIA” Sync” (page 46). -
Page 57: [Network Settings]
[Automatic Access Permission]: Sets whether or not to allow automatic access from newly detected DLNA controller. [Smart Select]: Allows a Sony DLNA controller to find the system as the target component to operate by using the infrared ray. You can set... -
Page 58: [Easy Setup]
[Renderer Name]: Displays the system’s name as it is listed on other DLNA devices on the network. x [Party Auto Start] [On]: Starts a party or joins an existing party at the request of a networked device compatible with the PARTY STREAMING function. [Off]: Off. -
Page 59: Additional Information
If you have any questions or problems concerning your system, please consult your nearest Sony dealer. On cleaning discs, disc/lens cleaners • Do not use cleaning discs or disc/lens cleaners (including wet or spray types). -
Page 60: Notes About The Discs
On moving the system • Before moving the system, make sure that there is no disc inserted, and remove the AC power cord (mains lead) from the wall outlet (mains). Notes about the Discs On handling discs • To keep the disc clean, handle the disc by its edge. -
Page 61: Troubleshooting
Note that if service personnel changes some parts during repair, these parts may be retained. In the event of a problem with the S-AIR function, have a Sony dealer check the entire system together (S-AIR main unit and sub unit). - Page 62 Symptom Video signals are only output from the HDMI OUT jack when connecting the HDMI OUT jack and other video output jacks at the same time. The dark area of the picture is too dark/the bright area is too bright or unnatural.
- Page 63 Symptom Problems and solutions There is no digital sound from • Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On] the HDMI OUT jack when using (page 56). Also, set [Audio Return Channel] in [HDMI Settings] of [System the Audio Return Channel Settings] to [Auto] (page 56).
- Page 64 • Try the following: 1 Press and hold N and Z on the unit for more than 5 seconds to open the disc tray. 2 Remove the disc. 3 Disconnect the AC power cord (mains lead) from the wall outlet (mains), then reconnect after several minutes. • Contact your Sony dealer or local authorized Sony service facility.
-
Page 65: Usb Device
Symptom Problems and solutions The Control for HDMI function • Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On] does not work. (page 56). • Make sure that the connected component is compatible with the [Control for HDMI] function. -
Page 66: Network Connection
• Picture/sound quality may be poor depending on Internet content providers. • Picture/sound quality may be improved by changing the connection speed. Sony recommends a connection speed of at least 2.5 Mbps for standard- definition video and 10 Mbps for high-definition video. - Page 67 Other Symptom Problems and solutions “Exxxx” appears in the front • Contact your nearest Sony dealer or local authorized Sony service facility and panel display. give the error code. appears without any • Contact your nearest Sony dealer or local authorized Sony service facility.
-
Page 68: Playable Discs
Playable Discs Blu-ray Disc BD-ROM BD-R/BD-RE DVD-ROM DVD-R/DVD-RW DVD+R/DVD+RW CD-DA (Music CD) CD-ROM CD-R/CD-RW Super Audio CD Since the Blu-ray Disc specifications are new and evolving, some discs may not be playable depending on the disc type and the version. Also, the audio output differs depending on the source, connected output jack, and selected audio settings. -
Page 69: Playable Types Of Files
Playable Types of Files Video File format Extensions 1)5) MPEG-1 Video/PS “.mpg,” “.mpeg,” “.m2ts,” “.mts” MPEG-2 Video/PS, 1)6) DivX “.avi,” “.divx” 1)5) MPEG4/AVC “.mkv,” “.mp4,” “.m4v,” “.m2ts,” “.mts” 1)5) WMV9 “.wmv,” “.asf” 3)5) AVCHD Music File format Extensions MP3 (MPEG-1 Audio “.mp3”... -
Page 70: Supported Audio Formats
Supported Audio Formats Audio formats supported by this system are as follows. Format LPCM 2ch Function “BD/DVD” “SAT/CABLE” “TV” (DIGITAL IN) a: Supported format. –: Unsupported format. Video Output Resolution Output resolution differs depending on the [Output Video Format] setting in [Screen Settings] (page 53). -
Page 71: Specifications
Specifications Amplifier Section BDV-E870: POWER OUTPUT (rated) Front L/Front R: 108 W + 108 W (at 3 ohms, 1 kHz, 1% THD) POWER OUTPUT (reference) Front L/Front R/Center/Surround L/Surround R: 167 W (per channel at 3 ohms, 1 kHz) Subwoofer: 165 W (at 3 ohms, 80 Hz) BDV-E370: POWER OUTPUT (rated) - Page 72 Dimensions (approx.) Mass (approx.) Design and specifications are subject to change without notice. • Standby power consumption 0.3 W. • Halogenated flame retardants are not used in the certain printed wiring boards. • Over 85% power efficiency of amplifier block is achieved with the full digital amplifier, S-Master.
-
Page 73: Language Code List
Language Code List The language spellings conform to the ISO 639: 1988 (E/F) standard. Code Language Code Language 1027 Afar 1183 Irish 1028 Abkhazian 1186 Scots Gaelic 1032 Afrikaans 1194 Galician 1039 Amharic 1196 Guarani 1044 Arabic 1203 Gujarati 1045 Assamese 1209 Hausa 1051 Aymara 1217 Hindi... -
Page 74: Glossary
Digital Cinema Auto Calibration (D.C.A.C) Digital Cinema Auto Calibration was developed by Sony to automatically measure and adjust the speaker settings to your listening environment in a short period of time. Dolby Digital This movie theater sound format is more advanced than Dolby Surround Pro Logic. - Page 75 PhotoTV HD “PhotoTV HD” allows for highly-detailed pictures, and photo-like expression of subtle textures and colors. By connecting Sony “PhotoTV HD” compatible devices using an HDMI cable, a whole new world of photos can be enjoyed in breathtaking Full HD quality. For...
- Page 76 To ensure that the subtle nuances of these high- quality media are transmitted with no deterioration, Sony has developed a technology called “S-AIR” for the radio transmission of digital audio signals with no compression, and has incorporated this technology into the EZW- RT10/EZW-RT10A/EZW-T100.
-
Page 77: Index
Index Numerics 24p True Cinema 76 3D 29 3D Output Setting 53 A/V SYNC 35 Attenuate - AUDIO 54 Audio 55 Audio DRC 54 Audio Output 54 Audio Return Channel 56 Audio Settings 54 Auto Calibration 48, 54 Auto Display 57 Auto Standby 56 AVCHD 74 BD Audio MIX Setting 54... - Page 78 Screen Format 53 Screen Saver 57 Screen Settings 53 SLEEP 51 Slideshow 35 Sound Effect 54 Speaker Settings 49, 54 Connection 49 Distance 49 Level 50 Subtitle 55 Super Audio CD Playback Channels 56 Super Audio CD Playback Layer 56 Surround amplifier 41 System Information 57 SYSTEM MENU 27, 35, 37,...
- Page 80 The software of this system may be updated in the future. To find out details on any available updates, please visit the following URL. For customers in Europe and Russia: http://support.sony-europe.com/ For customers in Asia and Australia: http://www.sony-asia.com/support Printed in Malaysia...