Sony MDR-IF230RK Operating Instructions Manual page 5

b When connecting to your Discman's
headphones jack, connect the cord to the
transmitter's PHONES IN jack only.
Transmitter
to PHONES IN jacks
Right channel
(red)
Unimatch
plug adaptor
(not supplied)
to a headphones
jack (stereo
phone jack)
2
If your AC power adaptor is equipped
with a voltage selector, before
connecting the AC power adaptor to an
AC outlet, set it to the operating
voltage in your area with a screw
driver.
AC power adaptor (supplied)
VOLTAGE SELECT
¥
LINE IN R PHONES IN L
DC IN 9V
Left channel
(white)
Connecting
cord
(supplied)
to a headphones
jack (stereo mini
jack)
Discman,
WALKMAN*,
TV, VCR, etc.
220V
240V 220V 110V
3
Connect the transmitter to a power
source.
Transmitter
LINE IN
to DC IN 9 V
jack
Notes
•Do not connect to the PHONES IN jacks and
LINE IN jack at the same time. If you do so, the
audio signals may be mixed.
•Use only the supplied AC power adaptor. Do
not use any other AC power adaptor.
•If the plug of the AC power adaptor does not fit
in the AC outlet, use the supplied AC plug
adaptor. (tourist model only)
•When you connect the connecting cord directly
to an earphone jack, the audio signal will not be
output through the right channel. In such a
case, use the separately sold PC-236HG plug
adaptor.
* WALKMAN is a registered trademark of Sony
Corporation.
120V
¥
R L
PHONES IN
DC IN 9V
AC power adaptor (supplied)
Polarity of the plug
to an AC
outlet
5