Connection Using Pppoe - Sony PCS-G70 Integration Manual

3-7. Connection using PPPoE

Example of system
Videoconference
terminal A
Ethernet
210.10.10.10
When a call is initiated from videoconference terminal A to videoconference terminal B.
1. The LAN Setup menu of videoconference terminal B is set as described below.
DHCP Mode:
Host Name:
IP Address:
Network Mask:
Gateway Address:
DNS Address:
LAN Mode:
Gatekeeper Mode:
Gatekeeper Address:
User Alias:
User Number:
SNMP Mode:
Trap Destination:
Community:
Description:
Location:
Contact:
PPPoE:
PPPoE User Name:
PPPoE Password:
Fixed IP for PPPoE:
Fixed IP Address for PPPoE: 211.10.10.10
PPPoE DNS:
Primary DNS:
Secondary DNS:
NAT Mode:
NAT Address:
Port Number Used:
TCP Port Number:
UDP Port Number:
Hybrid:
TOS:
PCS-G70/G70P
Internet
ONU
Regional IP
FTTH
network
Off
Blank
Blank
Blank
Blank
Blank
Auto Nagotiation (This mode is changed to a proper mode when mismatching
occurs in the mode.)
Off
Blank
Blank
Blank
Off
Blank
public
Videoconference Device
Blank
Blank
On
User (account) name acquired from a provider
Password acquired from a provider
On (When fixed IP is acquired)
Obtain automatically (Acquired from a provider. Select "Specify" when the
fixed DNS server address is specified. Enter the addresses specified from a
provider in "Primary DNS" and "Secondary DNS", respectively.)
Cannot be set.
Cannot be set.
Off
Blank
Default
2253
49152
On
Off
Videoconference
ONU
terminal A
FTTH Ethernet
211.10.10.10
3-13