Basic Connections: Connecting A Cable Or Antenna; Cable Or Antenna - Sony WEGA KDE42XBR950, KDE50XBR950, KDE55XBR950, KDE61XBR950 Operating Instructions Manual

Basic Connections: Connecting a Cable or Antenna

Cable or Antenna

Note on Using This Connection
To Do This ...
Switch the TV's input between
the cable and antenna
28
The way in which you will connect your TV varies, depending on how your
home receives a signal (cable, cable box, antenna) and whether or not you
plan to connect a VCR.
If You Are Connecting
Cable or Antenna
s
No cable box or VCR
Cable Box and Cable
s
Cable box unscrambles only some channels
(usually premium channels)
s
No VCR
Cable Box
s
Cable box unscrambles all channels
s
No VCR
If you are connecting a VCR
s
See the connections described on pages 33 and 35.
For best results, use this connection if you are connecting a cable or an
antenna and you:
s
Do not need a cable box to unscramble channels. (If you have a cable
box, see page 30.)
s
Do not intend to connect a VCR. (If you have a VCR, see pages 33 and
35.)
For antenna connection, use the supplied antenna cable.
Cable Type Connect As Shown
VHF Only or
Antenna
combined
cable
VHF/UHF
(supplied)
Cable
75-ohm
coaxial
cable
When using an indoor antenna, such as rabbit-ear or dipole-
antenna, keep the antenna away from the display unit. If not,
noise may appear on the screen.
Do This ...
ANT
Press to switch back and forth between the TV's VHF/UHF and CABLE
inputs.
See Page
28
29
30
VHF/UHF
CABLE