Pioneer PDP-503CMX Product Training Manual page 6

3. Integrator Menu
OFF TIMER
• A function to switch to Stand-by mode after a set time.
• This setting has OFF,
TIMER (1 to 24H/ every 1H)
MASK (0.0 to 9.5 H/ every 0.5 H)
MASK Color (WHITE /RED / GREEN/ BLUE)
2 by 2 mode
• A function to make temporally 4 screen multi-display.
• This setting has ON or OFF and display area (upper left/ lower
left/ upper right/ lower left).
• Able to set up using RS-232C command (MGY/ MGN/ MG1/
MG2/ MG3/ MG4)
ORBITER
• A function to control burned display by shifting picture location
for every moment.
• The setting has ON or OFF
• Make the picture location shift one dot by one dot horizontally or
vertically every eight minutes.
• Able to set up using RS-232C command (OMY/OMN).
INVERSE
• A function to control burned display by reversing output picture.
• The setting has ON or OFF.
• Able to set up using RS-232C command.
ID SET
• A function to set or change ID No.
MONITOR NAME
• A function to register a name with each unit.
• Able to set max. of twelve letters.
• Able to confirm the name by Display Call/ GET command
HDTV Mode Setting
• A function to set actual line number in HDTV (1080i/1035i)
• Able to set this function when signal mode is "12/13"
• Able to set up using RS-232C command
(1080i=H80/1035i=H35)
6